Microplastics in environment: global concern, challenges, and controlling measures

 Plastic pollution in various forms has emerged as the most severe environmental threat. Small plastic chunks, such as microplastics and nanoplastics derived from primary and secondary sources, are a major concern worldwide due to their adverse effects on the environment and public health. Several years have been spent developing robust spectroscopic techniques that should be considered top-notch; however, researchers are still trying to find efficient and straightforward methods for the analysis of microplastics but have yet to develop a viable solution. Because of the small size of these degraded plastics, they have been found in various species, from human brains to blood and digestive systems. Several pollution-controlling methods have been tested in recent years, and these methods are prominent and need to be developed. Bacterial degradation, sunlight-driven photocatalyst, fuels, and biodegradable plastics could be game-changers in future research on plastic pollution control. However, recent fledgling steps in controlling methods appear insufficient due to widespread contamination. As a result, proper regulation of environmental microplastics is a significant challenge, and the most equitable way to manage plastic pollution. Therefore, this paper discusses the current state of microplastics, some novel and well-known identification techniques, strategies for overcoming microplastic effects, and needed solutions to mitigate this planetary pollution. This review article, we believe, will fill a void in the field of plastic identification and pollution mitigation research.

Biofuel Production from Waste Cooking Oils and its Physicochemical Properties in Comparison to Petrodiesel

    Abstract    

Haphazard mining and consumption of fossil fuels have reduced petroleum reserves causing fossil fuel depletion and environmental degradation; thus, reflecting the need for the cheaper, renewable and eco-friendly alternative source of petroleum to meet the fuel demand. A million liters of edible oil used for cooking foods and date expired oils from oil manufacturers are discarded into sewage. This study primarily intends to study the feasibility of biodiesel production using such waste oils. In this work, biodiesel was prepared from waste cooking oils by a process called transesterification with NaOH as a catalyst. Our results showed that methyl ester (biodiesel) (92.67±0.90%), soap materials (1.33±0.224%), and glycerol (6±0.68%) were obtained after the transesterification of waste cooking oil. The physicochemical properties of biodiesel such as density, viscosity, volatility, surface tension, and flashpoint were analyzed, which were found to be 0.862±0.006 g/cm3, 2.23±0.021 cP, 0.327×10-3±4.5×10-6 g/s, 32.03±0.138 dyne/cm, 169.67±0.810°C, respectively. These properties were compared with that of commercial diesel as well as with the values specified by the American Society for Testing and Materials (ASTM) D6751. The density and the surface tension of the biodiesel were found similar to that of petrodiesel but its volatility was 3 times lower. Fourier-transform infrared spectroscopy (FTIR) spectra of the biodiesel showed methyl ester functional group at 1436 cm-1. Based on the cost of the materials used for production, the cost of biodiesel was estimated to be about 81 Nepalese rupees (0.67 USD) per liter. The properties of biodiesel also met the standard values of ASTM D6751. These findings indicate that waste oil is one of the feasible biodiesel sources and it can be used as a suitable alternative to petrodiesel.

    Details Link: https://doi.org/10.3126/njb.v8i3.33661 

Corn's Structure Revised

It has been previously thought that cellulose, a thick and rigid complex carbohydrate that acts like a scaffold in corn and other plants, connected directly to a waterproof polymer called lignin. However, Wang and colleagues discovered that lignin has limited contact with cellulose inside a plant. Instead, the wiry complex carbohydrate called xylan connects cellulose and lignin as the glue. Credit: Tuo Wang, LSU.

CRUDE OIL PROCESSING AND PRODUCTION OF PETROLEUM PRODUCTS

Petroleum product is important to source of energy to run our daily life. Crude oil is the main source of petroleum products. It consists of mainly hydrocarbon and another trace of elements. Crude oil can be separated by physical separation method and chemical conversion method. A physical separation method called fractional distillation method was studied. Six fractions were collected according to boiling point ranges. In this method, the light fraction was collected first and heavy fractions are collected later.